CJA
HOME HELP FEEDBACK SUBSCRIPTIONS ARCHIVE SEARCH TABLE OF CONTENTS
This Article
Right arrow Full Text (PDF)
Right arrow Submit a scholarly reply
Right arrow Alert me when this article is cited
Right arrow Alert me when eLetters are posted
Right arrow Alert me if a correction is posted
Services
Right arrow Similar articles in this journal
Right arrow Alert me to new issues of the journal
Right arrow Download to citation manager
Right arrow reprints & permissions
Citing Articles
Right arrow Citing Articles via Google Scholar
Google Scholar
Right arrow Articles by NEUFELD, P. D.
Right arrow Articles by DEVETH, J.
Right arrow Search for Related Content
PubMed
Right arrow Articles by NEUFELD, P. D.
Right arrow Articles by DEVETH, J.

Canadian Journal of Anesthesia, Vol 30, 646-652, Copyright © 1983 by Canadian Anesthesiologists' Society

Technical Communications: Safety of Anaesthesia Breathing Circuit Connectors

PHILIP D. NEUFELD PHD1, DAVID L. JOHNSON PHD1, and JOHN DEVETH 1

1 Bureau of Medical Devices, Health and Welfare Canada, Ottawa

Address correspondence to: Philip D. Neufeld, Bureau of Medical Devices, Environmental Health Centre, Tunney's Pasture, Ottawa, Ontario K1A 0L2.

Conical connectors used in anaesthesia breathing circuits are prone to accidental disconnections. We tested 291 connectors of 15 and 22 mm size and found that most did not comply with dimensional requirements in voluntary standards such as those issued by the Canadian Standards Association (CSA) and the American National Standards Institute (ANSI). However, measurements of disconnecting force showed no strong correlation with dimensional accuracy as determined by the standard gauge tests. When wrung together, metal-to-metal or plastic-to-plastic joints were considerably stronger than metal-to-plastic joints. Wrung joints were much stronger than connections made with a straight push, which showed no marked dependence on the type of material. Our results indicate that improved compliance with dimensional standards as determined by existing gauge tests will not improve connector performance. Rather, what is needed is a performance standard based on practical criteria. Under such a standard, some materials may prove unsuitable for friction-fit connections.

Key Words: EQUIPMENT; connectors, standards






HOME HELP FEEDBACK SUBSCRIPTIONS ARCHIVE SEARCH TABLE OF CONTENTS
Copyright © 1983 by the Canadian Anesthesiologists' Society.